Installing the display assembly
About this task
NOTE: : Ensure that the hinges
are opened to the maximum before replacing the display assembly on
the palmrest and keyboard assembly.
Steps
- Align and place the palmrest and keyboard assembly under the hinges on the display assembly [1].
- Seat the palmrest and keyboard assembly on the display assembly [2].
- Press the hinges down on the system
board, and palmrest and keyboard assembly [3].
- Replace the five (M2.5x5) screws that secure the left and right hinges to the system board, and palmrest and keyboard assembly [1].
- Route the display cable through the routing guides on the palmrest and keyboard assembly [1].
- Connect the display cable to the connector on the system board [2].
- Affix the antenna cables to the system board [3].
Data is not available for the Topic