Removing the system board
Steps
- Disconnect the power adapter port cable, optical drive cable and speaker cable from the system board [1, 2, 3].
- Remove the single (M2x2) screw that secures the optical drive connector to the system board [1].
- Lift the optical drive connector [2].
- Disconnect the following cables from the system board:
- Power button board cable [1].
- Finger print board cable [2].
- IO board cable [3].
- Hard drive cable [4].
- Touchpad cable [5].
- Keyboard cable [6].
- Remove the single (M2x4) screw that secures the system board to the palmrest and keyboard assembly [1].
- Flip the system board off the palmrest and keyboard assembly [2].
- Disconnect the VGA daughterboard cable from the system board [1].
- Lift the system board off the palmrest and keyboard assembly [2].
Data is not available for the Topic