Removing the touch pad assembly
Steps
- Open the latch and disconnect the hard drive cable and touch pad cable from the system board [1, 2].
- Peel the tape that secures the touch pad to the palmrest and keyboard assembly [3].
- Remove the two (M2x2) screws that secure the touch pad bracket to the palmrest and keyboard assembly [1].
- Lift the touch pad bracket off the palm rest and keyboard assembly [2].
- Remove the four (M2x2) screws that secure the touch pad to the palmrest and keyboard assembly [1].
- Lift the touch pad off the palmrest and keyboard assembly [2].
Data is not available for the Topic