Installing the display assembly
Steps
- Align and place the palmrest and keyboard assembly under the hinges on the display assembly [1].
- Press the hinges down on the system board, and palmrest and keyboard assembly [3].
- Press the hinges down on the system board, and palmrest and keyboard assembly [3].
- Replace the
five (M2.5x5) screws that secure the left and right hinges to the system board, palmrest and keyboard assembly [1].
- Route the display cable through the routing guides on the fan and the palmrest and keyboard assembly
[1].
- Affix the antenna cables to the system board [2].
- Connect the display cable and the optical drive cable to the connector on the system board [3, 4].
Data is not available for the Topic