Installing the system board
Steps
- Place the system board on the palmrest and keyboard assembly [1].
- Connect the VGA daughterboard cable to the system board [2].
- Flip the system board on the palmrest and keyboard assembly [3].
- Align the screw hole on the system board with the screw hole on the
palmrest and keyboard assembly.
- Replace the
single (M2x4) screw that secures the system board to the palmrest and keyboard
assembly [1].
- Place the optical drive connector and replace the single (M2x2) screw that secures it to the system board [1, 2].
- Connect the following cables to the system board:
- Power button board cable [1].
- Finger print board cable [2].
- IO board cable [3].
- Hard drive cable [4].
- Touchpad cable [5].
- Keyboard cable [6].
- Connect the power adapter port cable, optical drive cable and speaker cable to the system board [1, 2, 3].
Data is not available for the Topic