NOTE: : Ensure that the touch pad
is aligned with the guides available on the palm-rest and keyboard
assembly, and the gap on either sides of the touch pad is equal.
Steps
Place
the touch pad into the slot on the palmrest and keyboard assembly [1].
Replace the four (M2x2) screws that secure the touch pad to the palmrest and keyboard assembly [2].
Adhere the tape that secures the touch pad to the palmrest and keyboard
assembly [1].
Slide the touch pad cable into its connector on
the system board and close the latch to secure the cable [2].
Place
the touch pad bracket into the slot on the palmrest and keyboard assembly [1].
Replace the two screws (M2x2) that secure the touch pad bracket to the palmrest and keyboard assembly [2].