Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the speakers and provides a visual representation of the installation procedure.
![Installing the speakers](https://dl.dell.com/topics/vostro_3405_sm/images/GUID-C64FF5C2-1676-4042-9C07-AFFF4CD56888-low.jpg)
Steps
- Using the alignment posts, place the speakers on the palm-rest and keyboard assembly.
NOTE Ensure that the alignment posts are threaded through the rubber grommets on the speaker.
- Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
- Connect the speaker cable to the system board.
Data is not available for the Topic