Installing the hard drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the hard drive and provides a visual representation of the installation procedure.
Steps
- Place and slide the hard drive into the hard-drive bracket.
- Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.
- Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
- Connect the hard-drive cable to the hard drive.
- Place the hard-drive assembly on the palm-rest and keyboard assembly.
- Align the screw holes on the hard-drive assembly to the screw holes on the palm-rest and keyboard assembly.
- Replace the four screws (M2x3) that secure the hard-drive assembly to the palm-rest and keyboard assembly.
- Connect the hard-drive cable to the connector on the system board.
Data is not available for the Topic