Removing the system board
About this task
The following images indicate the location of the system board and provides a visual representation of the removal procedure.
Steps
- Remove the two (M2.5x5) screws from the right hinge.
- Fold the right hinge up.
- Disconnect the following cables from the system board:
- Speaker cable
- Keyboard FFC
- Power adapter port cable
- Keyboard backlight FFC
- Touchpad FFC
- Hard drive FFC
- IO board FFC
- fingerprint reader FFC
- power button FFC from the system board
- Remove the single (M2x4) screw that secures the system board to the palmrest.
- Carefully lift the system board away from the chassis.
Data is not available for the Topic