Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Vostro 3405 Service Manual

Removing the display bezel

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the SD card.
  3. Remove the base cover.
  4. Remove the battery.
  5. Remove the display assembly.

About this task

Removing the bezel

Steps

  1. Pry open the display bezel from the inner edge at the left and right sides of the display assembly.
  2. Pry open the display bezel from the inner edge at the top side of the display assembly.
  3. Pry open the hinge caps at the bottom side of the display assembly.
  4. Pry open the display bezel from the inner edge at the bottom side of the display assembly.
  5. Lift and remove the display bezel from the display assembly
    NOTE CAUTION: DO NOT use a scribe or any other objects to pry up the display bezel in the manners shown in the images below as the pressure applied on the display panel by the scribe will damage the display panel. Bezel pryingBezel prying 2

  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\