Removing the system board - Realtek audio
About this task
![Removing the system board](https://dl.dell.com/topics/vostro_3400_sm/images/GUID-96C99D1D-41B5-4169-9521-368EF7641F77-low.jpg)
![Removing the system board](https://dl.dell.com/topics/vostro_3400_sm/images/GUID-83D469D0-EAD7-4134-962D-6F2CD1A805E2-low.jpg)
Steps
- Remove the two (M2.5x5) screws from the right hinge, Fold the right hinge up.
- Disconnect the following cables from the system board:
- Speaker cable
- Keyboard FFC
- Power adapter port cable
- Keyboard backlight FFC
- Touchpad FFC
- Hard drive FFC
- IO board FFC
- Fingerprint reader FFC
- Power button FFC from the system board
- Remove the single (M2x4) screw that secures the system board to the palmrest.
- Carefully lift the system board away from the chassis.
Data is not available for the Topic