Installing the WLAN card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
![Install the WLAN card](https://dl.dell.com/topics/vostro_3400_sm/images/GUID-91971D77-D8A1-42A7-9741-4C9EB9E28E7E-low.jpg)
Steps
- Replace the WLAN card into the M.2 Slot on the system board.
- Connect the WLAN antenna cables to the connectors on the WLAN card.
NOTETable 1. WLAN Antenna CablesThe table below show the respective indicators for the antenna cables:
Cable color
| Indicator on WLAN
|
---|
Blue
| White triangle
|
Orange
| Black triangle
|
- Place the WLAN card bracket to secure the WLAN antenna cables to the WLAN card.
- Replace the single (M2x3) screw to secure the WLAN bracket and the WLAN card to the palmrest.
Data is not available for the Topic