Installing the M.2 2230 Solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
![Install the SSD](https://dl.dell.com/topics/vostro_3400_sm/images/GUID-4C9189E0-690D-497A-8490-93F586832AA3-low.jpg)
Steps
- Place the solid-state drive into the thermal plate and install the single (M2x2) screw.
- Slide and insert the tab of the solid-state drive into the solid-state drive slot.
- Replace the single (M2x2.2) screw and tighten the single captive screw to secures the thermal plate to the palmrest.
Data is not available for the Topic