Installing the display assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE Ensure that the hinges are opened to the maximum before replacing the display assembly on the palmrest and keyboard assembly.
![Install the display assembly](https://dl.dell.com/topics/vostro_3400_sm/images/GUID-7BCDFD32-42EC-4587-9EAA-D073A071EA2B-low.jpg)
![Install the display assembly](https://dl.dell.com/topics/vostro_3400_sm/images/GUID-A0D183E2-26B1-4A0E-9B0C-3D9B0AB18338-low.jpg)
Steps
- Align and place the system under the hinges on the display assembly.
- Install the four (M2.5x5) screws securing the display assembly in place.
- Re-route the display cable and WLAN antenna cables through the routing channels on the palmrest.
- Reconnect the display cable to the connector on the system board.
Data is not available for the Topic