Dell Precision 15 7000 series (7510) Owner's Manual

Removing the system board

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. SD card
   2. battery cover
   3. battery
   4. base cover
   5. hard drive
   6. keyboard
   7. HDD cable
   8. primary memory
   9. WLAN card
   10. WWAN card
   11. M.2 SSD
   12. video card
   13. power connector port
   14. palmrest
   15. I/O board left
   16. I/O board right
   17. heat sink
3. Perform the following steps as shown in the illustration:
   1. Remove the screws that secure the shield to the system board [1].
   2. Lift the shield away from the computer [2].
   3. Disconnect the eDP cable [3, 4].
   4. Lift the tab and disconnect the power-connector cable [5, 6].
   5. Remove the screws that secure the system board to the computer [7].
   6. Lift and remove the system board from the computer[8].