Dell Precision 15 7000 series (7510) Owner's Manual

Installing the system board

1. Align the system board into its original position on the computer.
2. Tighten the screws to secure the system board to the computer.
3. Connect the following cables:
   1. power connector
   2. eDP
4. Install the:
   1. heat sink
   2. I/O board right
   3. I/O board left
   4. palmrest
   5. power-connector port
   6. video card
   7. M.2 SSD
   8. WWAN card
   9. WLAN card
   10. primary memory
   11. HDD cable
   12. keyboard
   13. hard drive
   14. base cover
   15. battery
   16. battery cover
   17. SD card
5. Follow the procedure in After working inside your computer.