Dell Precision 15 7000 series (7510) Owner's Manual

Installing the display assembly

1. Insert the guides on the display assembly into the slots on the computer.
2. Tighten the screws to secure the display assembly in place.
3. Affix the tape on the heat pipe.
4. Connect the eDP cable to the correct connectors on the system board.
5. Insert the wireless antenna cables through the routing hole on the chassis.
6. Tighten the diplay assembly screws at the bottom and back of the computer.
7. Align the display hinge cap and tighten the screws to secure it to the computer.
8. Route and connect the antenna cables to their connectors.
9. Install the:
   1. palmrest
   2. WWAN card
   3. WLAN card
   4. keyboard
   5. hard drive
   6. base cover
   7. battery
   8. battery cover
10. Follow the procedure in After working inside your computer