Dell Precision 15 7000 series (7510) Owner's Manual

Removing the display panel

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. battery cover
   2. battery
   3. base cover
   4. hard drive
   5. keyboard
   6. palmrest
   7. display assembly
   8. display bezel
      NOTE This is applicable only for non touch systems.
3. To remove the display panel for non touch systems:
   1. Remove the screws that secure the display panel to the display assembly [1].
   2. Lift the display panel and turn the display panel over to access the eDP cable [2].
   3. Peel the adhesive to access the eDP cable.
   4. Disconnect the eDP cable from the connector.
   5. Lift the display panel.
   
4. To remove the display panel for touch systems:
   1. Using a plastic scribe lift the edges of the display panel to disengage it from the display assembly.
      
   2. Lift the display panel and turn the display panel over to access the eDP and display cables.
      
   3. Peel the adhesive to access the eDP cable [1, 5].
   4. Disconnect the eDP and display cables from the connector on the back of the display panel [2, 3, 4, 6].