Removing the NVMe Flexbay
- Follow the procedure in
Before working inside your computer.
- Remove the:
- side cover
NOTE:Do not remove the side cover, if the front I/O bezel is unlocked.
- HDD bezel
- To remove the NVMe flexbay :
- Press the release button [1] to unlock the latch [2].
- Pull the latch to slide the carrier out of the HDD slot.
- To remove the SSD carrier from the NVMe flexbay:
- Press the release button to slide the M.2 SSD carrier out of the NVMe flexbay.
- Pull the M.2 SSD carrier out of the NVMe flexbay.
- To remove the SSD from the SSD carrier:
- Remove the screws on either side of the SSD.
- Remove the screw from the top of the SSD carrier.
- Slide the SSD cover from the top of the carrier.
- Slide the SSD out of the M.2 slot on the carrier.
![Remove the SSD](https://dl.dell.com/content/guides/public/Html/precision_5820_om_pub/images/GUID-7D21FF18-79F3-4051-973F-C46D73FDD45B-low.png)
NOTE:For more information on detailed parts requirement in upgrade scenarios refer to, KB Article Number:
000185631 and
000146243.
Data is not available for the Topic