Installing the VR heat sink
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the VR heat sink and provide a visual representation of the installation procedure.
![Installing the VR heat sink](https://dl.dell.com/content/guides/public/Html/prec_3650t_sm/images/GUID-9924B621-8315-434E-85FE-37EE187DA5A1-low.jpg)
Steps
- Remove the liner behind the VR heatsink module.
- Align and adhere the VR heatsink on the system board.
- Tighten the two captive screws that secure the VR heatsink to the system board.
Data is not available for the Topic