Installing
heat sink and heat sink fan
Steps
- To install the heat sink fan:
- Align and place the slots on the fan to the slots on the heat sink module.
- Replace the four screws to secure the heat sink fan to the heat sink.
- To replace the heat sink:
- Align the heat sink onto the processor [1].
- Tighten the 4 captive screws to secure the heat sink assembly to the
system board [2].
NOTE:Tighten the screws in a sequential order (1,2,3,4) as mentioned on
the system board.
- Connect the heat sink fan cable to the slot on the system board [3].
- Install the:
- Hard drive and optical drive module
- Front bezel
- Side cover
- Follow the procedure in After working inside your computer.
Data is not available for the Topic