Removing the
hard drive and optical drive module
Steps
- Follow the procedure in Before working inside your computer.
- Remove the:
- Side cover
- Front bezel
- To release the hard drive and optical drive module:
- Disconnect the hard drive data cable and power cable from the connectors
on the hard drive [1, 2].
- Slide
the release tab to unlock the hard drive and optical module [3].
- Unroute the hard drive cables [1] and optical drive cables [2] through the retention clip and HDD-ODD release tab respectively.
- Lift the
hard drive and optical module [3]
- To remove the hard drive and optical drive module:
- Disconnect the optical drive data cable and optical drive power
cable from the connectors on the optical drive [1, 2].
- Slide and lift the hard drive and optical drive module from the
system [3].
Data is not available for the Topic