Installing the
optical drive
Steps
- Slide the optical drive into its slot in the system [1].
- Lift the hard
drive and optical module [2].
- Connect the optical drive data cable
and power cable to the connectors on the optical drive [1, 2].
- Place the hard
drive and optical module back on the system [3].
- Connect the
hard drive data cable and hard drive power cable to the connectors
on the hard drive [1,2].
- Slide the release
tab to lock the module [3,4].
- Install the:
- Front bezel
- Side cover
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic