Installing the
hard drive assembly
Steps
- To replace the 2.5 inch hard drive from the assembly bracket:
- Align the
tabs on the hard drive with the slots on the hard drive assembly at a 30 degree
angle [1].
- Press the
hard drive so that it gets secured to the hard drive assembly bracket [2].
- To replace the 3.5 inch hard drive from the assembly bracket:
- Align the
tabs on the hard drive with the slots on the hard drive assembly at a 30 degree
angle [1].
- Press the
hard drive so that it gets secured to the hard drive assembly bracket [2].
- To replace the hard drive assembly:
- Insert the hard drive assembly into the slot on the system [1,2].
- Connect the power cable and hard drive cable to the connectors on
the hard drive [3,4].
- Install the Side cover.
- Follow the procedure in After working inside your computer.
Data is not available for the Topic