Installing the Internal Antenna
Steps
- Peel off the mylar tape from internal antenna.
- To install the antenna on the system:
- Align and insert the white antenna cable into the ANT-W slot on the chassis [1,2]
- Replace the single screw to secure the antenna to the chassis [3].
- Align and insert the black antenna cable into the ANT-B slot on the chassis [1,2].
- Replace the single screw to secure the antenna to the chassis [3].
- Route the antenna cable across the two hooks [1].
- Route the antenna cable through the cable hole on the chassis [2].
- Remove the plastic tube from internal antenna cable.
- Install the:
- Hard drive and optical drive module
- Front bezel
- Side cover
- Follow the procedure in After working inside your computer.
Data is not available for the Topic