Removing the
palmrest
- Follow the procedure in Before working inside
your computer.
- Remove the:
- battery cover
- battery
- base cover
- hard drive
- keyboard
- Remove the 15 screws (M2.5x5.0, M2.0x3.0)at the bottom of the computer which secure the palmrest to the computer
.
- To remove palmrest:
- Lift the tab and disconnect the fan cable [1] and system board cable [ 2].
- Remove the 11 screws (M2.5x5.0)that
secure the palmrest to the computer [3].
- By using plastic scribe release the tabs
on the edges of the palmrest and remove the palmrest from the computer [4].
Data is not available for the Topic