Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Precision 7720 Owner's Manual

Removing the display panel

NOTE For touch systems perform following step.
  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. battery cover
    2. battery
    3. base cover
    4. hard drive
    5. keyboard
    6. palmrest
    7. display assembly
    8. display bezel
  3. To remove the display panel:
    1. Using a plastic scribe lift the edges of the display panel to disengage it from the display assembly.
      This figure shows removing the display panel for touch systems.
    2. Lift the display panel and turn the display panel over to access the eDP and display cables.
      Figure shows how turn the display panel to access the eDP cables.
    3. Peel the adhesive tape to access the eDP cable [1, 5].
    4. Disconnect the eDP and display cables from the connector on the back of the display panel [2, 3, 4, 6].
      Figure shows disconnecting the eDP and display cables.

  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\