Installing the
fingerprint reader
- Align the fingerprint reader into its original
position on the chassis.
- Connect the finger print reader cable.
- Place the metal bracket on the chassis.
- Replace the M2.0X3 screws to secure the fingerprint reader
to the chassis.
- Affix the adhesive tape to secure the fingerprint
reader.
- Install the:
- palmrest
- power connector port
- graphic card
- M.2 SSD card
- WWAN card
- WLAN card
- primary memory
- secondary memory
- HDD cable
- keyboard
- hard drive
- base cover
- battery
- battery cover
- SD card
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic