Allows you to set, change, or delete the administrator
(admin) password.
NOTE You must set the admin password before you set the system or hard
drive password. Deleting the admin password automatically deletes
the system password and the hard drive password.
NOTE Successful password
changes take effect immediately.
Default setting:
Not set
System Password
Allows you to set, change or delete the system password.
NOTE Successful password
changes take effect immediately.
Default setting:
Not set
Internal HDD-2 Password
Allows you to set, change, or delete the administrator
password.
NOTE Successful
password changes take effect immediately.
Default
setting: Not set
Strong Password
Allows you to enforce the option to always set strong
passwords.
Default Setting: Enable Strong Password
is not selected.
NOTE If Strong Password
is enabled, Admin and System passwords must contain at least one uppercase
character, one lowercase character and be at least 8 characters long.
Password Configuration
Allows you to specify the minimum and max password
lengths of Administrator and System passwords.
minimum -4(by default, if you want to change you
can increase the number)
maximum -32 ( you can decrease the number)
Password Bypass
Allows you to enable or disable the permission to
bypass the System and the Internal HDD password, when they are set.
The options are:
Disabled
Reboot bypass
Default setting: Disabled
Password Change
Allows you to enable the disable permission to the
System and Hard Drive passwords when the admin password is set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup Changes
Allows you to determine whether changes to the setup
options are allowed when an Administrator Password is set. If disabled
the setup options are locked by the admin password.
allow wireless switch changes
UEFI Capsule Firmware Updates
Allows you to enable or disable. This option controls
whether this system allows BIOS updated via UEFI capsule update packages.
The options are:
Enable UEFI Capsule Firmware—enabled by default
Computrace
Allows you to activate or disable the optional Computrace
software The options are:
Deactivate
Disable
Activate (selected by default)
NOTE The Activate
and Disable options will permanently activate or disable the feature
and no further changes will be allowed
CPU XD Support
Allows you to enable the Execute Disable mode of the
processor.
Enable CPU XD Support (default)
OROM Keyboard Access
Allows you to set an option to enter the Option ROM
Configuration screens using hotkeys during boot. The options are:
Enable
One Time Enable
Disable
Default setting: Enable
Admin Setup Lockout
Allows you to prevent users from entering Setup when
an Administrator password is set.
Default Setting: Disabled
Master password lockout
This option is not selected by default
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\