Installing the
heat sink assembly
- Insert the heat-sink assembly in its slot.
- Tighten the captive M2.5x5.0 screws to secure
the heat-sink assembly to the computer.
NOTE Tighten the screws on the system board in the order stamped onto the heat sink next to the screws [1, 2, 3, 4, 5, 6, 7, 8].
- Connect the fan cables to the system board.
- Install the:
- palmrest
- keyboard
- hard drive
- base cover
- battery
- battery cover
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic