Installing the
display panel
NOTE For touch systems perform
following steps.
- To install the display panel for touch systems:
- Place the display panel on a flat surface.
- Connect the eDP and display cables to the
connector on the back of the display panel and affix the adhesive
tape.
- Turn the display assembly over.
- Align the display panel with the tabs on
the display assembly.
- Press the edges of the display panel to
secure it to the display assembly.
- Install the:
- display bezel
- display assembly
- palmrest
- keyboard
- hard drive
- base cover
- battery
- battery cover
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic