Removing the system board
About this task
The figure indicates the location of the system board and provides a visual representation of the removal procedure.
Steps
- Locate the system board on your computer.
- Remove the single (M2x3) screw that secures the fingerprint reader metal bracket.
- Remove the fingerprint metal bracket from the computer and flip the fingerprint sensor over.
- Disconnect the camera cable from the system board.
- Remove the two screws that secure the EDP metal bracket.
- Lift the EDP metal bracket from the computer.
- Peel the tape that secures the display cable to the system board.
- Open the latch and disconnect the display cable from the system board.
- Disconnect the LED board cable, touchpad cable and the keyboard cable from the system board connector.
- Remove the four (M2x3) screws that secure the system board to the palm-rest and keyboard assembly.
- Lift the system board off the palm-rest and keyboard assembly.
Data is not available for the Topic