Installing the LED board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the LED board and provides a visual representation of the installation procedure.
![Installing the LED board](https://dl.dell.com/topics//precision_3551_sm/images/GUID-D1F671BE-E6B4-4685-A0C0-1589A99C4070-low.jpg)
![Installing the LED board](https://dl.dell.com/topics//precision_3551_sm/images/GUID-B11231B2-5D67-466A-AFF5-030CDD7DDA62-low.jpg)
Steps
- Locate the LED board slot on your computer.
- Align and place the LED board on the slot on your computer.
- Install the single (M2x3) screw that secures the LED board to the computer.
- Adhere the LED board cable to the adhesive strip on the computer.
- Connect the LED board cable to the connector on the system board.
Data is not available for the Topic