Installing the heatsink assembly-UMA
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the heatsink assembly and provides a visual representation of the installation procedure.
Steps
- Locate the heatsink slot on your computer.
- Align and place the heatsink fan on to the heatsink assembly.
- Install the single (M2x5) screw that secures the heatsink fan to the heatsink assembly.
- Align and place the heatsink assembly into the slot of your computer.
- Install the two (M2x5) and four (M2x3) captive screws to secure the heatsink assembly to the computer.
NOTE: Install the screws as per the callout on the heatsink.
- Connect the heatsink fan cable on to the connector on the system board.
Data is not available for the Topic