Removing the LED board
About this task
The figure indicates the location of the LED board and provides a visual representation of the removal procedure.
![Removing the LED board](https://dl.dell.com/topics//precision_3551_sm/images/GUID-EB0D5AED-3740-48E8-B855-F89852AD65CB-low.jpg)
![Removing the LED board](https://dl.dell.com/topics//precision_3551_sm/images/GUID-C98AB730-9A6B-40DA-BC0C-3B12021D906C-low.jpg)
Steps
- Locate the LED board on your computer.
- Open the latch and disconnect the LED board cable from the system board.
- Peel back the LED board cable.
NOTE: The LED board cable is secured to the computer by an adhesive strip.
- Remove the single (M2x3) screw that secures the LED board to the computer.
- Lift the LED board out of the computer.
Data is not available for the Topic