Installing the smart card reader board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the smart card reader board and provides a visual representation of the installation procedure.
![Installing the smart card reader board](https://dl.dell.com/topics//precision_3551_sm/images/GUID-02132410-8043-4BAA-B52E-35BA2BCF5425-low.jpg)
![Installing the smart card reader board](https://dl.dell.com/topics//precision_3551_sm/images/GUID-65CDF614-AA93-4783-BE79-96250C2EB000-low.jpg)
Steps
- Locate the smart card reader board slot on your computer.
- Align and place the smart card reader board into the slot on your computer.
- Install the four (M2X3) screws that secure the smart card reader board to the computer.
- Connect the smart card reader cable on to the connector on the system board and lock the latch.
Data is not available for the Topic