Installing the memory modules
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the memory module and provides a visual representation of the installation procedure.
![Installing the memory modules](https://dl.dell.com/topics//precision_3551_sm/images/GUID-B0CEFF6F-4B3F-499C-B5F1-4F00C56786B2-low.jpg)
![Installing the memory modules](https://dl.dell.com/topics//precision_3551_sm/images/GUID-F7DA23E7-7157-4CC6-B2E1-2F9BB40ADED4-low.jpg)
Steps
- Align the notch on the memory module with the tab on the memory-module slot.
- Slide the memory module firmly into the slot at an angle.
- Press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Data is not available for the Topic