Table 1. Temperature,
Shock, VibrationThe table describes the environmental conditions.
Temperature
M.2 2280 form factor
Operating1
Non-operating 2
0–70º C
-10–85º C
Temperature Gradient3
Operating
Non-operating
30º
C/hr (Typical)
30º C/hr (Typical)
Humidity
Operating
Non-operating
5–95%
5–95%
Shock and Vibration
Range
Shock 4
Operating
Non-operating
1500
G / 0.5 ms
230 G / 3 msec
Vibration5
Operating
Non-operating
2.17
GRMS (5–800Hz) Max
3.13 GRMS (5–800Hz) Max
NOTES:
Operating temperature is targeted for 70º C.
Please contact your Intel representative for details
on the non-operating temperature range.
Temperature gradient measured without condensation.
Shock specification assume the device is mounted
securely with the input vibration applied to the drive-mounting screws.
Stimulus may be applied in the X,Y, or Z axis and shock specification
is measured using Root Mean Squared (RMS) value.
Vibration specifications assume the device is mounted
securely with the input vibration applied to the drive-mounting screws.
Stimulus may be applied in the X, Y, or Z axis. Vibration specificities
is measured using RMS value.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\