Allows you to create a system asset tag if an asset
tag is not already set. This option is not set by default.
SERR Messages
Controls the SERR message mechanism. This option is
enabled by default. Some graphics cards require that the SERR message
mechanism be disabled.
BIOS Downgrade
This controls flashing of the system firmware to previous
revisions.
Data Wipe
Wipe on Next boot
BIOS recovery
BIOS recovery from the hard drive
Follow the procedure to recover BIOS from hard
drive.
Power on the system.
While the blue Dell logo is visible, press the F2 key to enter the System Setup.
Press the Num Lock key, and verify that the
Num Lock light is on.
Press the Caps Lock key, and verify that the
Caps Lock light is on.
Press the Scroll Lock key, and verify that
the Scroll Lock light is on.
Press the Alt + F keys at the same
time. The system will beep as the setup defaults are restored.
Press the Alt + F keys at the same
time to restart the system. The changes are automatically saved.
Data Wipe
This field allows your to securely erase data from
all internal storage devices. The following is a list of devices affected
by this operation:
Internal HDD
Internal SSD
Internal mSATA
Internal eMMC
WARNING: This operation will permanently delete all
data from the devices.
BIOS Recovery
This option enable you to recover from certain corrupted
BIOS conditions from a recovery file on the primary hard drive or
an external USB key.This option is enabled by default.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\