Dell OptiPlex 7450 All-In-One Owner's Manual

Installing camera module

1. Align and place the camera module on the display frame on the computer.
2. Connect the camera cable.
3. Tighten the M3.5x5 screws to secure the camera module to the computer.
4. Install the:
   1. chassis frame
   2. system board
   3. VESA mount bracket
   4. speaker
   5. OSD board
   6. system fan
   7. processor
   8. heat sink
   9. WLAN card
   10. SSD card
   11. coin cell battery
   12. memory module
   13. cable cover
   14. system board shield
   15. hard drive
   16. back cover
   17. optical drive
   18. stand
5. Follow the procedure in After working inside your computer.