Installing the WLAN card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the wireless card and provides a visual representation of the installation procedure.
Steps
- Connect the antenna cables to the WLAN card.
The following table provides the antenna-cable color scheme for the WLAN card of your computer.
Table 1. Antenna-cable color schemeThe table provides the antenna-cable color scheme for the WLAN card:
Connectors on the wireless card
| Antenna-cable color
|
---|
Main (white triangle)
| White
|
Auxiliary (black triangle)
| Black
|
- Place the WLAN card bracket to secure the antenna cables.
- Align the notch on the WLAN card with the tab on the WLAN card slot. Insert the WLAN card into the connector on the system board.
- Replace the (M2x3.5) screw to secure the WLAN card bracket to the WLAN card.
- Align and place the WWAN-card shielding cover, press to fit it firmly to cover the WWAN card.
Data is not available for the Topic