Installing the memory modules
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the installation procedure.
![Image: Installing the memory](https://dl.dell.com/content/guides/public/Html/optiplex7080_micro_sm/images/GUID-82AAF4F9-3973-4310-81C7-9DDC3FEA09C3-low.jpg)
Steps
- Align the notch on the memory module with the tab on the memory-module slot.
- Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE:If you do not hear the click, remove the memory module and reinstall it.
Data is not available for the Topic