Installing the side cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the side cover and provides a visual representation of the installation procedure.
![Image: Installing the side cover](https://dl.dell.com/content/guides/public/Html/optiplex7080_micro_sm/images/GUID-4EB12F07-EBB9-45B1-A83B-9210BCDB4854-low.jpg)
![Image: Installing the thumbscrew](https://dl.dell.com/content/guides/public/Html/optiplex7080_micro_sm/images/GUID-B3A4AD11-AB99-4838-8D12-707411784189-low.jpg)
Steps
- Align the side cover with the grooves on the chassis.
- Slide the side cover towards the back of the system to install it.
- Tighten the thumbscrew (6x32) to secure the side cover to the system.
Data is not available for the Topic