Installing the hard-drive bracket
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the hard-drive bracket and provides a visual representation of the installation procedure.
![Image: Installing the hard drive bracket](https://dl.dell.com/content/guides/public/Html/optiplex7080_micro_sm/images/GUID-CC59F0C9-ED0B-42C3-BDFF-251B2518D4FA-low.jpg)
Steps
- Place the hard-drive into the bracket.
- Align and insert the pins on the drive bracket with the slots on the drive.
NOTE:Note the orientation of the hard-drive so that you can replace it correctly.
Data is not available for the Topic