Installing the M.2 2230 PCIe solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the installation procedure.
![Image: Installing the SSD](https://dl.dell.com/content/guides/public/Html/optiplex7080_micro_sm/images/GUID-7F0669A0-7266-4718-8ADA-8876775A4844-low.jpg)
Steps
- Align the notch on the solid-state drive with the tab on the solid-state drive connector on the system board.
- Insert the solid-state drive at a 45-degree angle into the solid-state drive connector.
- Replace the screw (M2x3.5) that secures the M.2 2230 PCIe solid-state drive to the system board.
Data is not available for the Topic