If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the powered graphical processing unit and provides a visual representation of the installation procedure.
Steps
Align the powered GPU with the PCI-Express card connector on the system board.
Using the alignment post, connect the powered GPU in the connector and press down firmly. Ensure that the powered GPU is firmly seated.
Lift the pull tab to close the PCIe door.
Align the triangles on the powered GPU cable holder with the triangles on the chassis.
Place the powered GPU cable holder on the computer chassis until it clicks to place.
Route the power cable through the retention tab on the cable holder.
Connect the two power cables, through the slot on the cable holder, to the connector on the powered GPU.