Installing the hard drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the hard-drive module and provides a visual representation of the installation procedure.
![Installing the hard drive bracket](https://dl.dell.com/content/guides/public/Html/optiplex_7070_ultra_sm/images/GUID-DD69EDE9-8411-4860-9A8E-9899BA06C636-low.jpg)
Steps
- Insert the hard drive into the protective sleeve.
NOTE:Ensure to match the mark on the protective sleeve with the hard drive PIN and connector location.
- Pull the protective sleeves along the hard-drive edges.
- Connect the hard-drive cable to the connector on the hard drive.
Data is not available for the Topic