Installing the hard-drive bracket
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
![Installing the hard drive bracket](https://dl.dell.com/content/guides/public/Html/optiplex_7070_ultra_sm/images/GUID-427844FE-23C4-4C2D-9262-6C18FCB3EE24-low.jpg)
Steps
- Align the connector edge of the hard-drive module with the tab end of the hard-drive bracket.
- Place the hard-drive module in the hard-drive bracket.
Data is not available for the Topic