Installing heatsink
- To install the
heatsink:
- Place
the heatsink on the processor [1].
- Tighten
the three (M3)
captive screws to secure the heat sink to the system board [2].
NOTE: The heatsink
assembly is secured to the system board with four screws and three
screws for 35 W and 65 W CPU respectively.
![Displays the installation of heat sink](https://dl.dell.com/content/guides/public/Html/opti7070_micro_service_manual/images/GUID-CA70FDF7-0CF7-41D5-985E-697F32ABFE2F-low.jpg)
- Install the:
- Heatsink fan
- 2.5–inch hard drive assembly
- Side cover
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic