Removing the
WLAN card
- Follow the procedure in Before working inside
your computer.
- To remove the external antennae
- Loosen the antenna screw to remove the antenna from the computer.
- Remove the:
- Side cover
- 2.5 inch hard drive assembly
- To remove the WLAN card:
- Remove the single (M2X3.5) screw that secures the plastic tab to
the WLAN card [1].
- Remove the plastic tab to access the WLAN antenna cables [2].
- Disconnect the WLAN antenna cables from the connectors on the WLAN
card [3].
- Lift the WLAN card from the connector on the system board [4].
Data is not available for the Topic